0
To replace the heater core on a 1987 Nissan Stanza, first, disconnect the battery and drain the coolant from the radiator. Remove the dashboard and the center console to access the heater core housing. Disconnect the heater core hoses from the engine compartment, remove the mounting screws, and take out the old heater core. Install the new heater core in reverse order, making sure to reconnect all hoses and components before refilling the coolant and reassembling the dashboard.
What else can I help you with?
How do you replace the water pump on a 1987 Nissan Stanza?
Drain the water from your 1987 Nissan Stanza. Remove the water return hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Where is the temperature sensors on an 1987 Nissan Stanza?
The temperature sensor on a 1987 Nissan Stanza is located on the rear of the radiator. It is about one-third of the way down from the top.
Where can you get a 1987 Nissan Stanza wagon body kit?
You can get a 1987 Nissan Stanza Wagon body kit at auto part stores. You can also check with a certified dealer.
How do you replace an ignition coil on a 1987 Nissan Stanza GXE 1974cc engine?
Very easy it is simply bolted unto the wall and unplug.
To replace a heater core on a 1987 Nissan 300zx does the dash have to be removed?
yes, see toms z31.com
Where is voltage regulator on 1987 Nissan Stanza Wagon?
In the 1987 Nissan Stanza Wagon, the voltage regulator is typically integrated into the alternator. To access it, you will need to remove the alternator from the engine bay. Look for the rectangular component attached to the back of the alternator, which is the voltage regulator. If you need to replace it, ensure the alternator is properly disassembled according to service manual guidelines.
Where is the PCV Valve on a 1987 Nissan Stanza?
It is at the top of the valve cover. Hope that heps!
How do you remove and replace the heater core on 1987 nissan300zx with air?
To remove and replace the heater core on the 1987 Nissan 300ZX with air, begin by removing the dashboard totally. This means the radio panel and the instrument cluster. Remove all air ducts and access the heater core. Remove the bolts holding the core and replace it with a new core. Then replace the dashboard and instrument panel.
What is the firing order for a 1987 Nissan Stanza?
If it is a four cylinder it will be: 1 3 4 2
Where is the fuel pump located on a 1987 Nissan Stanza sedan?
It is located inside the fuel tank.
What are the timing settings for a 1987 Nissan Stanza?
timing is 15 degrees before on both std and auto.
Where is the computer located on a 1987 Nissan Stanza?
it might be under the passenger's seat covered by some carpet.
