To replace the water pump on a Mazda RX-7, first ensure the engine is cool and disconnect the battery. Drain the coolant and remove any components obstructing access, such as the radiator and timing belt cover. Detach the old water pump by removing its bolts, clean the mounting surface, and install the new pump with a new gasket. Reassemble the components, refill the coolant, and check for leaks.
it has one
in the tank
To replace the water pump on a 1986 Mazda RX-7, first, disconnect the battery and drain the coolant from the radiator. Remove the drive belts, then detach the water pump by unbolting it from the engine block, ensuring to also remove the timing cover if necessary. Clean the mating surfaces, install a new gasket or sealant, mount the new water pump, and reassemble everything in reverse order. Finally, refill the coolant and check for leaks before starting the engine.
Inside the fuel tank
rebuild or replace.....you have a serious issue there
mazda doesnt rx7 anymore :(
No. Oil cooled.
To run, no. To pass emissions, yes.
The Mazda Rx7 has the Wankel Rotary Engine in it
Mazda didn't make the RX7 in 1974.
on top of the water pump housing
Yes, there is a transmission in a 1990 Mazda RX7 convertible.