0
To replace the water pump on a 1993 Mitsubishi Lancer, start by disconnecting the battery and draining the coolant. Remove the drive belts, timing belt cover, and timing belt if necessary, following your service manual for specific instructions. Take out the old water pump, clean the mounting surface, and install the new pump with a new gasket. Reassemble by reversing the disassembly steps, refilling the coolant, and checking for leaks.
What else can I help you with?
How do you change spark leads on Mitsubishi lancer 1993 model?
no
Where is the fuse box on 1993 Mitsubishi lancer?
drivers side at front of motor
What is the bolt pattern for a 2003 Mitsubishi lancer Is is 4x100 or 4x114?
All Mitsubishi Lancers newer than 1993 models should be 4x100 I believe. I think the only exceptions are Mitsubishi Lancer VRX and EVO models, being 4x414. Refer to site listed in related links for a full list.
How do you replace the timing belt on a 1993 Mitsubishi Galant ES?
you die
How many liter of gas does 1993 Mitsubishi lancer consume for every kilometer?
it would take around 11-12 km / liter
How do you change the water pump on a 1993 Mitsubishi diamante?
Ooh, this is a fun one. The water pump is driven by the timing belt, so you have to remove and replace that to change out the water pump. ~Pengauin
What is the fuel tank capacity on a Mitsubishi lancer 1993 sedan?
The fuel tank capacity of a 1993 Mitsubishi Lancer sedan is approximately 50 liters (13.2 gallons). This capacity allows for a decent range between refuels, depending on the engine and driving conditions. However, it's always a good idea to check the owner's manual for specific details related to your model.
How do you replace a water pump on a 1993 Lexus Es300?
how do you replace a water pump on a 1993 lexus es300?
How much is a water hose for 1993 Pontiac grand am?
how do i replace a water hose in 1993 pontiac grand am
What is the tire size of the Mitsubishi Lancer?
average size is P195/60R-14, however some of the oz or ralley may have larger sports tires. On my 1993 GL model they are 175 /70 R13 on my 2004 Lancer ES- 185/70 R 14 changed from R14 to 195/60 R15. no issues.
Cylinder head bolt torque for 1993 Mitsubishi expo?
cylender head bolt torque for 1993 Mitsubishi expo
How do you replace the clutch for a 1993 Mitsubishi Eclipse?
you will have to remove the transmission. once you have the tranny off you can remove and replace the clutch...if you buy a new clutch specific directions will come with it...too long to write here.
