To replace the accelerator cable in a 1997 Hyundai Excel, first, ensure the vehicle is turned off and safely supported. Begin by disconnecting the negative battery cable, then remove the throttle body cover and intake duct for access. Detach the old cable from the throttle linkage and the accelerator pedal, and install the new cable in the reverse order. Finally, reassemble any components and reconnect the battery before testing the accelerator for proper function.
To replace the alternator in a 1998 Hyundai Excel, start by disconnecting the negative battery cable to prevent electrical shock. Remove the drive belt by loosening the tensioner, then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and the positive battery terminal from the alternator, and then install the new alternator by reversing the steps. Finally, reattach the drive belt and reconnect the battery cable.
how ofen do you change a timing belt on 96 excel
Take it to a mechanic
Hyundai Excel was created in 1985.
To get the radio code for the Hyundai Excel you need to request it from Hyundai.
90,000km. If you do not replace the belt and the old one snaps, your valves can hit the pistons. Expensive fix.
To adjust the clutch in a Hyundai Excel, start by locating the clutch cable near the firewall. You can adjust the cable tension by turning the adjusting nut on the cable; turning it clockwise increases tension, while counterclockwise decreases it. Ensure there is about 1-2 inches of free play at the pedal before it engages. After adjusting, test the clutch by pressing the pedal to ensure smooth engagement and disengagement.
where is the alternator located in a Hyundai excel 94 model
fuse box in the engine bay
To replace the rocker cover gasket on a Hyundai Excel, first, ensure the engine is cool and disconnect the battery. Remove any components obstructing access to the rocker cover, such as the air intake or throttle cable. Unscrew the rocker cover bolts and carefully lift off the cover, then remove the old gasket. Clean the mating surfaces, place the new gasket in position, and reassemble by reversing the disassembly steps, ensuring all bolts are tightened to the specified torque.
replace every 90k kl or 60k kl if driving hard don't wait for it to go as you damage the engine if it brakes
Hyundai ATF only.