To unlock the radio code for a 1997 Hyundai Excel, you typically need to retrieve the serial number from the radio. This can often be done by removing the radio from the dashboard and checking the label on the unit. Once you have the serial number, you can contact a Hyundai dealership or check the owner's manual for instructions on obtaining the radio code. Some online resources may also provide assistance based on the serial number.
You don't
my code is 1564 for 95 Hyundai accentFromHyundai OwnerEach Hyundai will come with a card this card contains the code to you radio without this card the radio will not unlock because of the theft system.
Hyundai Excel was created in 1985.
I have my code I need to know what to do with it so my radio will work the battery was removed.
To set the radio code for a 2005 Hyundai Elantra, first ensure the vehicle is in the "On" or "Run" position without starting the engine. If the radio displays "CODE," enter the four-digit code using the preset buttons (1-6) on the radio. After entering the correct code, press the "AM/FM" or "Enter" button to confirm. If you don't have the code, you may need to consult your owner's manual or contact a Hyundai dealer for assistance.
Mine was reset when the radio says "code" by entering 2456 on radio channels
Call your dealer. You will probably need the radio serial #, but possibly not.
Due to Hyundai's anti-theft commitment, you must visit a Hyundai dealer to get the code. This service is offered to ensure your device is safe.
To remove the stock radio from a 1994 Hyundai Excel, first, disconnect the negative battery terminal to ensure safety. Then, use a flathead screwdriver to gently pry off the trim panel surrounding the radio. Once the trim is removed, unscrew the mounting screws securing the radio in place, and carefully slide the radio out of the dashboard. Finally, disconnect the wiring harness and antenna cable from the back of the radio.
The code is 4 digit long, each radio has its own code, to set code: Say the code is 2418 using the station preset numbers press #1 x2 press #2 x4 press #3 x1 press #4 x8 the number should be on the LCD then press #5 once. If you incorrectly enter the code 3 times the radio will shut off and you will have to wait an hour before you can try again.
To retrieve the radio code for a 2007 Hyundai Accent, you typically need to check the owner's manual or contact a Hyundai dealership with your vehicle's VIN. The code is usually provided as a security feature to prevent theft. If the manual is unavailable, you may also find the code on a card that came with the vehicle or on a label inside the glove compartment.