dome lights do not work. checked the fuse which is ok. checked the bulbs which are also ok. where is the problem
To change the interior dome lights in a 2006 Honda Ridgeline, first, ensure the vehicle is off and the dome light switch is in the "door" position. Use a flathead screwdriver or a trim tool to gently pry off the light cover. Remove the old bulb by pulling it straight out and insert the new bulb securely. Finally, replace the cover and test the light to ensure it works properly.
If dome lights and sunroof of a Mitsubishi Galant are not working, it is probably due to blown fuse. It is time to replace old ones.
how do you remove dome light lens on 2008 trailblazer
bad combination light switch
dome lights stays on
It is the buttons on the upper console next to the dome lights that you can program to operate your garage door openers.
I had this issue turned out to be one of the switches on the door. Does the dash show any door ajar lights? If so start on that door
The dome light has a switch that has an off position. Any other lights you can simply remove the bulbs.
What make and model is it? does it have a "dome override button"?
The dome lights work automatically and manually. If you have manually turned on a dome light, you must manually turn it off. If it was turned on automatically, it will automatically turn off. On my 2005 model, there is a dash switch to select(Manual)On/Automatic/(Manual)Off. This switch works on all dome lights but will not turn off an individual light that was turned on (pushed in)individually. If you have a passenger that has turned on a dome light, you/they must turn it off manually. Children are particularly prone to leaving individual dome lights on (and it doesn't even have to be dark out), so you should check periodically to assure that your battery is not drained.
To change the fuse for the dome lights in a Chevy Blazer, first, locate the fuse box, which is typically found under the dashboard on the driver's side or under the hood. Use the fuse diagram on the cover or in the owner's manual to identify the specific fuse for the dome lights. Once located, use a fuse puller or pliers to remove the blown fuse and replace it with a new one of the same amperage. Finally, test the dome lights to ensure they are working properly.