This is from the Owners Handbook of my Mazda 323, 1996 :
Alternator Drive Belt.
1. Loosen the alternator mounting bolt and adjusting bar bolt. Replace Fanbelt.
2. Turn the adjusting bolt until the correct tension is obtained. The deflexion should be 10mm.
3. Tighten bolts and recheck the tension.
55 ltrs (1997 323 hatch)
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
The Mazda Familia is also known as the Mazda 323. A 1997 Mazda Familia is recommended to use 10 W 30 oil.
To replace the water pump on a Mazda 323 1.6 DOHC, first, drain the coolant and remove the drive belt. Next, detach the timing belt cover and remove the timing belt to access the water pump. Unbolt the old water pump from the engine and clean the mounting surface before installing the new pump with a new gasket. Finally, reassemble the timing belt, cover, and drive belt, refill the cooling system with coolant, and check for leaks.
First, disconnect the battery and then, remove the alternator and power steering belt, then the timing belt cover, the timing belt and the two pulleys, unscrew the pump bolts and that's it
it is to the left of the engine beside your belt.
replace headlight on mazda sp20
The type of brake fluid a Mazda 323 made in 1997 uses is called Dot 3. This is the standard type of brake fluid for most modern cars.
Go to a mechanic :)
its got 2 horns behind the front bumper.
sistem pemasangan temingbelt
If the engine is a non-interference type then the answer is NO. See the list below: