To replace brake pads and rotor: Unbolt wheel, unbolt caliper, remove caliper, unbolt caliper bracket, remove rotor, replace rotor, bolt up bracket, compress caliper, replace pads, replace caliper, bolt up caliper, bolt up wheel, repeat whole thing on other side...
The same way you replace the front. there both disc brakes all you do is take the caliper bolts out if there factory it'll be star head bolt ifs its aftermarkret they'll be Allen heads just remove the caliper and replace the brakes
toolsfront or rear?drum or disc?need more infoif front disc then you will need caliper piston compressor or big C clampneed socket for caliper bolts removal
Purchase new hubs complete with pre-greased bearings. (About $160.00 each). Remove caliper and disc. Remove old hub. Replace new hub, disc and caliper. Voila!
To change the front brake disc pads on a 1980 Dodge B300, first lift the vehicle and securely support it on jack stands. Remove the front wheel, then locate the brake caliper and unbolt it from the caliper bracket. Slide the caliper off the rotor, remove the old pads, and replace them with new ones, ensuring they are properly aligned. Reattach the caliper, tighten the bolts, replace the wheel, and lower the vehicle before testing the brakes.
If the front brake caliper is sticking, the disc may be uneven. Brakes that are left to scrape on the disc for a long time before they are changed will damage the disc enough to cause sticking or slipping.
Landrover RAVE manual for Freelander Mk1 gives the following values:- Front disc brakes Front caliper mounting bolts 83 Nm Front disc to drive flange screws 5 Nm Front disc shield to hub screw 8.5 Nm Front caliper guide pin bolts 27 Nm Front caliper brake hose banjo bolt 28 Nm
First, determine if they are disc or drum. If drum, remove the drum and replace the shoes. If they are disc, remove the caliper (and disc if necessary) replace the shoes and reassemble.
To replace the front brake discs on a Transit 350, begin by safely lifting the vehicle and removing the front wheels. Next, remove the caliper by unbolting it, taking care to support it to avoid straining the brake line. After removing the caliper, take off the brake pads and then unbolt the old brake disc from the hub. Finally, install the new disc, reattach the caliper and pads, and ensure everything is securely fastened before lowering the vehicle and testing the brakes.
The best thing you can do is replace the caliper.
To change the front disc pads on a Renault Megane Scenic, first, safely lift the vehicle and remove the front wheels. Then, locate the caliper, unbolt it, and carefully slide it off the brake disc. Remove the old pads, and install the new ones, ensuring they are correctly positioned. Finally, reattach the caliper, replace the wheel, and lower the vehicle before testing the brakes.
Most front wheel drive vehicles do. -The caliper in all vehicles is fixed and the 'floating disc' is the brake rotor.