easiest way is to just feed the new line along side of the old one and use some plastic zip ties to secure it in place to the old one. removing the old brake line could be very difficult without removing the fuel tank and its really not necessary.
Each brake line is held in place with a swivel nut at each end. Turn the swivel nut to the left. The brake line will come off.
How do i replace brake lines on a 2000 grand am
measure affected line
== == In most cases - NO
Length of back brake line to replace. hole in it between front and back door
Replace the brake line, bleed the brake. top up with brake fluid. Done.
depends where the leak is. In the brake line or at the pump? electric or mech brakes? if its in the line you should be able to replace the line section
replace brake line the damage to the line or if the jb weld gets into the line it will affect how the system works.
To replace the brake line on a 1999 Mercury Sable, first, safely lift the vehicle and secure it on jack stands. Locate the damaged brake line, then use a line wrench to disconnect it from the brake components and remove any mounting clips. Cut and replace the line with a new pre-bent brake line, ensuring proper routing and securing it with clips. Finally, bleed the brake system to remove any air before testing the brakes.
Remove the line and replace it. Then make sure to keep the master cylinder full while you & a helper bleed the front brake caliber. Be sure and use brake line tools and not open-end wrenches or you will damage the brake lines.
replace the line and fill and bleed breaks.
Replace and bleed line