0
To replace the radiator top hose on a Mazda 626, first ensure the engine is cool and disconnect the negative battery terminal for safety. Loosen the hose clamps at both ends of the top hose using a screwdriver or socket wrench, then carefully remove the hose from the radiator and engine. Install the new hose by sliding it onto the radiator and engine connections, securing it with the clamps. Finally, refill the radiator with coolant, start the engine to check for leaks, and ensure proper operation.
What else can I help you with?
How do you replace a thermostat in a 2000 Mazda 626?
Follow the TOP radiator hose to the engine block Remove the hose from the engine block. Thermostat should pop out. Some screw in, most pop out.
Where is thermostat on 1996 Mazda 626?
The thermostat on a 1996 Mazda 626 is located in the engine compartment, specifically at the junction where the upper radiator hose connects to the engine. To access it, you'll need to remove the upper radiator hose and the thermostat housing. Once the housing is removed, you can replace the thermostat. Always ensure the engine is cool before starting this procedure to avoid burns.
What does the large upper radiator hose connect to on a 1991 Mazda 626?
I'm pretty sure it goes from the top of the radiator to the engine block.
Where is the thermostat located on a Mazda 626?
generaly thermostat will be inline with the upper radiator hose, as it goes into the engine block.
Does a 1999 Mazda 626 ex have a thermostat?
yes, it is located where the lower radiator hose meets the engine block
How much does a radiator cost for a 1999 Mazda 626?
I paid $125 online for a radiator for my 1998 Mazda 626 lx.
How do you replace the thermostat located on a 1997 Mazda 626 4 cylinder?
To replace the thermostat on a 1997 Mazda 626 with a 4-cylinder engine, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and clean the mating surfaces. Install the new thermostat, reassemble the housing and hose, refill the coolant, and reconnect the battery.
Where is the thermostat located on a 1996 Mazda 626 2.5 liter engine?
on my 1997 Mazda 626, it's located on the left hand side bottom of the engine where the bottom radiator hose goes to the engine. hope this helps you.
Water-pump location on 1999 Mazda 626?
The 1999 monster 626 water pump is located on the front of the engine. You can follow the top radiator hose directly to the water pump.
Where is the thermostat located on a 2002 Mazda 626 2.5 liter motor?
Look in a removable housing at the engine end of the upper radiator hose
How much does it cost to replace a radiator on a 98 Mazda 626?
I PAID $170 FOR MINE IN VA I paid $125 for a radiator online. Installed it myself.
Where is the thermostat located on a 1994 Mazda 626?
The thermostat is located on the front left of the motor facing the radiator(Almost directly below the radiator cap). The lower radiator hose is attached to the thermostat housing.
