At the back of the engine on the coolant outlet that goes to the heater hoses on the firewall.
Remove the water supply hoses from your 2002 Dodge Ram 1500 heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Remove the water from your 2002 Chevrolet Camaro cooling system. Remove the water supply hoses from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
the inlet heater hose that connects to the top of the water pump connects to which outlet on the heater core? the far outboard or the inside? this is in a 2002 ford f250, 7.3.
possibly clogged heater core, remove heater core hoses and flush with a hose until clean. reinstall hoses fill with coolant and let it run. if heater core is too plugged up you will have to replace it.
To replace the heater coil on a 2002 Dodge Ram 1500, first disconnect the battery and drain the coolant. Remove the dashboard and the HVAC unit to access the heater core, which is typically located behind the glove compartment. Disconnect the hoses and any electrical connections, then unbolt the heater core from its housing. Install the new heater core, reassemble the HVAC unit, reconnect the hoses, refill the coolant, and finally, reattach the dashboard.
The heater core is located in the center of the dash inside the heater unit. If you look under the dash on the passengers side you will see, from right to left, a blower, the AC box then the heater unit where the core is. Also, in the engine compartment you will find two coolant hoses that enter the firewall near the center, those hoses connect directly to the heater core.
To remove the heater matrix from a 2002 Citroën Berlingo, first ensure the vehicle is cool and disconnect the battery. Remove the dashboard and the center console to access the heater unit. Disconnect the coolant hoses from the heater matrix, then unbolt and remove the heater unit from the vehicle. Finally, carefully extract the heater matrix from the unit and replace it as needed.
To replace the heater core in a 2002 Ford E-150 van, first, disconnect the battery and drain the coolant from the radiator. Remove the dashboard and the center console to access the heater core, which is located behind the firewall. Disconnect the hoses and mounting bolts securing the heater core, then replace it with the new unit and reassemble everything in reverse order. Finally, refill the coolant, bleed the system, and reconnect the battery.
You prob have to replace the heater core
how do u replace alternator belt on 2002 mazda protege 5 stationwagon
The easiest way to check is to feel the heater hoses going into the firewall. Check the hoses from a cold start and check that both hoses get uncomfortably hot at about the same rate. This is a good indication that coolant is flowing.