Goto www.hmaservice.com (Hyundai webtech 2000) Set the Model Year and engine drop-downs on the top of the page and then click Search on the far right. Enter the search keword "speedometer" (leave all items as the default values) You'll see a "Speedometer Replacement Cable" document that you can click on. This contains all the details you need. Enjoy!
The speed sensor is a timy magnetic reed switch located inside the speedometer cluster in the dash. The reed switch is magnetically triggered by a magnet that spins in the speedometer cable.
Disconnect the cable from negative terminal of the batteryIf working on a 2.0L detach the shift cable from the transaxleDisconnect the speedometer cable from the transaxleUnscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoidRemove the start motor mounting bolts and remove the starter
Speedometer cable replace 1989 toyota
The speedometer is electronic on a 1999 Ram, and does not have a cable.
There is no speedometer cable on that vehicle. The speedometer is driven electronically.
There is not an odometer cable. The odometer is driven by the speedometer. If the odometer is not working then you will have to replace the speedometer head.
# Disconnect the negative battery cable # Remove the air intake duct and the air cleaner assembly # Disconnect the speedometer cable from the transaxle # Unscrew the nut and disconnect the battery cable from the starter motor then disconnect the wiring from the solenoid # Remove the starter motor mounting bolts,supporting the starter motor as the bolts are removed and remove the starter motor
You can fix the speedometer in your 1994 Oldsmobile 98 by replacing the speedometer cable. If changing the speedometer cable does not fix your speedometer you will need to replace the entire speedometer.
I pretty sure it doesn't have a speedometer cable, it is electronic.
its electronic, there is no cable
You need to disconnect the cable from the transaxel. Then you pull out your dash cluster. Remove clip from speedometer cable then just pull it out. Reverse for installation.
You can replace the speedometer cable, on your 1988 Ford Ranger, by loosening the cable nut on each end of the cable. The cable will come off and can then be replaced.