if you are asking this question on a website,,,,get someone else to do it,,,,I can explain how to do it,,,,,but you will not understand unless you have someone there to guide you,,,,take it to a professional
fuse box in the engine bay
i own a 1990 excel and we found it in fuel tank have to drop tank.
i learned by watching the video
You need to replace the water pump. It is likely the pulley came off because the water pump bearing failed and siezed.
replace the bushing where the clutch pedal attaches to the master cylinder arm.
To replace the clutch on a 1990 Geo Metro, first, disconnect the battery and remove the transmission by unbolting it from the engine and separating it from the drive shafts. Once the transmission is removed, take out the old clutch assembly, including the pressure plate and clutch disc. Install the new clutch disc and pressure plate, ensuring they are aligned properly. Finally, reattach the transmission, reconnect all components, and test the clutch operation before driving.
To remove the ignition control module from a 1990 Hyundai Excel, first disconnect the negative battery cable to ensure safety. Locate the ignition control module, which is typically mounted on the firewall or near the distributor. Unplug the wiring harness connected to the module and remove the mounting screws. Finally, carefully lift the module off its mounting brackets.
if it is working at all,,,follow the sound,,,,if not.....it should be tucked up under the dash to the right of the steering column
cable clutch
Hyundai Elantra was created in 1990.
Smoking brakes usually indicate a stuck caliper or improper install on pads/shoes. Have you calipers checked and make use they move smoothly.
Clutch - band - was created in 1990.