To replace the water pump on a Mazda B2600 pickup, first, disconnect the battery and drain the coolant. Remove the serpentine belt, then detach any components blocking access to the water pump, such as the fan or timing cover. Unscrew the water pump bolts and remove the old pump, clean the mounting surface, and install the new pump with a new gasket. Finally, reassemble the components, refill the coolant, and reconnect the battery.
It is behind the timing case cover behind the crankshaft pulley.You have to remove the timing belt to replace the water pump for this repair.
To replace the water pump on a Mazda B3000 pickup truck, first, disconnect the negative battery cable and drain the coolant from the radiator. Next, remove any components obstructing access to the water pump, such as the serpentine belt and timing cover. Unbolt the old water pump from the engine block, clean the mating surfaces, and install the new water pump with a new gasket. Finally, reassemble everything, refill the coolant, and reconnect the battery.
No
behind the radiator,in the middle of the engine
u
the fan clutch is built into the water pump,it cant be separated,you have to replace the water pump.
About $500.00
mcspayd@verizon.net
The water pump from Mazda 626 is the same, all part from Mazda 626 work very good in the Kia Credos and Clarus.
4 1/2
with a screwdriver
BETWEEN $400 and $600