if it has (ABS) the first thing you do take off the whole Hub assembly then you hav to take it and get the hub decompressed (do not try your self) unless you know how too.. then you beat the studs through or you unscrew them..good luck i just done that about a week ago lol
You have to have the hub pressed out of the knuckle to replace the wheel studs.
Lug studs on a 1994 Acura Integra is pressed into the hub. To remove the lug studs safely raise and prop the car. Remove the wheel, brake components, and suspension parts from the hub. Press out the old studs.
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
you dont
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.
you buy a new cadillac
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
To remove wheel studs from a 2000 Honda Civic the wheel needs to be removed. Taking the wheel hub completely off the vehicle makes the process of removing the studs easier. The studs are pressed in and use of a machine press to remove them is recommended.
pound them out,and replace them with new ones
if the bolts do not get on then you just have to change the studs
Unbolt hub and press out wheel studs, clean hub face, replace rotor and press wheel studs back through, remount hub
You need to get the rotor off to replace studs with new ones.