0
Disconnect both the negative and positive battery terminal leads. Cap the battery terminals to prevent a battery short. Using a jumper cable, connect the negative lead to the positive lead for a few minutes.
BOTH LEADS MUST BE REMOVED FROM THE BATTERY WHEN CONNECTED TOGETHER!
This process will drain any residual energy from the ECM and PCM. Shifting may be affected while the TCM relearns shift points.
I am not responsible for damage to your ECM or TCM. Do this procedure at your own risk.
What else can I help you with?
How do I reset the ECU in my 2000 Honda Civic ex?
How i reset the computer on Honda civic ex 2.000
How can you reset an ECU on a Kia Sedona?
How can you reset an ECU on a Kia Sedona
Where is ECU reset button for a 1991 Toyota cressida?
There is no ECU reset button.
How do you reset the ecu in a Peugeot 206?
disconnect the battery for 45mins, with the doors closed. After 45mins reconnect the battery and open the drivers door and you should hear a beep. your ecu will be reset. then take it out for a drive trying to keep to around 2000-2500rpm for the ecu to calibrate to the parameters.
How do you reset a computer in a 2000 Honda Civic EX?
why do u need to reset the ECU?? to do it basically just disconnect your negative terminal from your battery.... unless u can unplug the ECU its self?? Anyone know if that is gonna do anything?
How do you reset the ecu for 97 Nissan 240sx?
you push the reset button on the back of the ECU.
How do you reset 2000 dodge neon ecu?
To reset the ECU of a 2000 Dodge Neon, disconnect the negative battery terminal and leave it disconnected for about 15 minutes. This allows the system to reset and clears any stored error codes. Afterward, reconnect the negative terminal and start the car, allowing the ECU to relearn its parameters during normal driving conditions. Make sure to check for any persistent issues that may have triggered the need for a reset.
Anyone had ECU troubles with a 1995 polo?
I have a vw polo 2000 that had ecu problems, so we disconnected the battery then the ecu from the car and left it for he day. The next morning we reconnected it and that reset it. hope it works for you too
Your 20000 Honda Accord se check engine light stays on?
A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
How do you reset dash indicators Toyota Tundra?
To reset the dash light indicators on a Toyota Tundra the trucks ECU will need to be reset. The simple way of resetting the ECU requires disconnecting the battery for 5 seconds. When the ECU is reset the lights will be clear.
How do you reset the ecu on BMW 316 compact?
Depend the number of the ecu and year of the car, general you can reset it, just recoded. The other option is, change the ecu and reset the ews and then you can redode the imobilizer with software machine. www.autocentralinas.com
How do you reset vehicle to turn off check engine light on 2005 hyundia sonata?
The Check Engine Light comes on when the ECU has detected a problem with the emissions system. Have the ECU scanned with an OBD2 scanner to retrieve the code that has been set. That code will tell you where to start looking for the problem. Once the problem is repaired you will need an OBD2 scan tool to reset the light.
