Hold trip reset button down then turn key on but do not crank engine over light maint. light will go off after a couple of second.
To reset the "Service Due Soon" light on a 2006 Acura TL, start by turning the ignition to the "On" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on; the light should be reset. If it doesn’t turn off, repeat the process.
If you have fixed the problem it should reset itself. If not, the light will stay on.
To reset the service light on a 2006 Mercedes ML350, first turn the ignition to the "on" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and back on. The service light should now be reset.
You'll need to use a scan tool or other OBDII software to reset your service lights.
To reset the service light on a 2006 Mitsubishi L200, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After that, turn the ignition off and then start the engine to ensure the service light has reset. If the light remains on, repeat the process to confirm.
To reset the service engine soon light on a 2006 Mercury Mountaineer, you can buy a scan tool. Make sure you note down the numbers before scanning.
Buy the oxygen sensor and fix the car and get the light reset !
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
To reset the service light on a 2006 Porsche Cayman S, turn the ignition on without starting the engine. Press the gas pedal fully three times within 10 seconds. Then, turn off the ignition and start the engine to confirm that the service light has been reset. If the light remains on, repeat the process.
To reset the service light on a 2006 Porsche Boxster, turn the ignition on without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you restart the vehicle, the service light should be reset. If the light remains on, you may need to repeat the process or consult a professional.
You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.
Turn key II position Press & hold Odomenter reset button until service light flashing. Press the reset button again for > 5 seconds The service oil life display will be reset to 100%