To reset the maintenance light on a 2002 Acura CL-Type S, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then, turn the ignition off and back on to confirm that the maintenance light has been reset. If done correctly, the maintenance light should no longer be illuminated.
How to reset maintenace light on 1999 acura t l 3.2
To reset the maintenance light on a 2011 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" for the maintenance reminder you wish to clear. Finally, confirm the reset, and the maintenance light should turn off.
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.
To reset the maintenance light on a 1996 Acura RL, first, turn the ignition to the "ON" position without starting the engine. Next, press and hold the "Select" and "Reset" buttons on the instrument panel until the maintenance light blinks and then goes off. Release the buttons, and the maintenance light should be reset. Finally, turn the ignition off and then back on to ensure the light remains off.
i dont know how
To reset the maintenance light on a 1997 Acura TL, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it doesn't, repeat the process to ensure it was done correctly.
Usually your oil needs changing. You have to reset the light yourself. Look in manual it will show how to reset it.
To reset the A12 maintenance light on a 2007 Acura MDX, turn the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and then scroll to "Maintenance." Select "Reset" for the A12 maintenance item, and confirm the reset. Finally, turn off the ignition and then restart the vehicle to ensure the light has been cleared.
Press and hold the select AND reset buttons at the same time. Turn ignition switch to on and wait maybe 10 seconds until the maintenance light goes out.
To reset the maintenance required message in a 2006 Acura TSX, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine, and the maintenance light should be reset. If the light remains, repeat the process.
Turn key to position 2 and hold select and reset together for 10 secounds
i only want to repair my car without taking it in to the dealership, thank you