To reset the maintenance minder light in a Honda Fit, start by turning the ignition to the "ON" position without starting the engine. Press the "Trip" button until the display shows the maintenance menu. Then, with the maintenance minder displayed, press and hold the "Trip" button for about 10 seconds until the light goes off. Finally, turn off the ignition, and the reset should be complete.
Honda's maintenance minder says to, "refer to Civic Sedan's owner's manual."
Check the owner's manual under 'maintenance minder'. It will tell you exactly how to do it.I did it last night on a 2007 Element:- press reset button until the maintenance is indicated- press and hold down reset button for about 10 seconds, the display will begin flashing- release and then press the reset button down again for about 5 seconds- the 'maintenance minder' will reset
Check the owner's manual under 'maintenance minder'. It will tell you exactly how to do it.I did it last night on a 2007 Element:- press reset button until the maintenance is indicated- press and hold down reset button for about 10 seconds, the display will begin flashing- release and then press the reset button down again for about 5 seconds- the 'maintenance minder' will reset
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
its not a light,reset with your key
You can't reset that light...there is no such thing as a 2002 Honda Element...they didn't come out until 2003.
The flashing wrench light on your 2007 Honda Element SC typically indicates that the vehicle's maintenance minder system has detected a need for routine maintenance, such as an oil change or other service. It's a reminder to check your maintenance schedule and take your vehicle in for servicing. If the light persists after maintenance is performed, it may be necessary to reset the maintenance minder system. Always consult your owner's manual for specific guidance related to your vehicle.
The oil maintenance minder on a Honda Element is typically located on the vehicle's dashboard display. It can be accessed by turning on the ignition without starting the engine and then navigating through the vehicle's information display using the buttons on the steering wheel or dashboard. The minder indicates when it's time for an oil change based on driving conditions and mileage. If you need to reset it after an oil change, follow the specific reset procedure outlined in the owner's manual.
In my experience with modern cars you don't. The mechanics set it and it will be reset when you take it in.
If the Odyssey uses the same routine as a Toyota, reset is accomplished by setting the mileage meter to total [as opposed to Trip A, Trip B] and then turning the ignition key to off. Then, holding the mileage reset button down, turning the ignition switch back on...continuing to hold the reset button .... in 5-10 seconds the maintenance 'reminder' light should go out.
To reset the maintenance required light in a 2012 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off, indicating that the reset was successful. If it doesn't turn off, repeat the process.
The wrench indicator on the dashboard of a Honda Fit signifies that it's time for scheduled maintenance. This light typically appears when the vehicle's maintenance minder system detects that certain maintenance tasks, such as an oil change or other service, are due based on the car's mileage or driving conditions. It's important to consult the owner's manual for specific maintenance recommendations and reset the indicator after servicing. Ignoring this light can lead to potential issues if maintenance is neglected.