To reset the SRS (Supplemental Restraint System) light on a 1996 Mitsubishi Eclipse, you typically need to use a diagnostic scanner that can read SRS codes. First, ensure that the vehicle's ignition is off, then connect the scanner to the OBD-II port. After retrieving any stored codes, clear them to reset the light. If you don't have a scanner, you may also disconnect the battery for about 15 minutes, but this may not always resolve the issue if there are underlying problems with the system.
The light is on because there is a problem. Bring it in and get it looked at. That SRS could save your life someday.
disconnect negative of battery for 3 + minutes.
how to reset a srs warning light on 307 203 model
The light is on because there is a problem with the SRS. Take it to a professional for repair of the SRS (Air Bags). They will reset the light after the repair. This is not a DIY repair.
How can you reset the srs light for a1994 mitshubishi expo LRV 2.4
how do i reset srs light on scion tc
You have problems with your air bag system. Try to find a local Mitsubishi Dealer or Autozone garage. They can read out the error message and tell you more.
The light won't reset until repairs have been made with the srs system.
(Supplemental Restraint System) SRS light is on because there is a problem with the system. Fix the problem and the light will reset itself. As long as that light is on the SRS will not function if needed.
how do i reset srs light on scion tc
You can't. The SRS light is on because the SRS (Supplemental Restraint System) has detected a fault in the system. Until it is fixed the light will remain on and the SRS will not function if needed. Once the necessary repairs are done the SRS system will reset the light itself.
SRS (Supplemental Restraint System) You have a problem with the air bags. You have to get the problem repair by a professional and they will reset the light.