To reset the TPMS light on a 2010 Honda Element, start by ensuring all tires are properly inflated to the recommended pressure. Next, turn the ignition to the "On" position without starting the engine. Press and hold the TPMS reset button, located under the steering column, until the TPMS light blinks twice and then goes off. Finally, turn off the ignition, then start the engine to confirm that the light has reset.
Press and hold the odometer reset button, & turn on the ignition switch without starting the car. After around 5 seconds the light will reset. Release the odometer reset button and turn the ignition off.
How do you reset maint read light on 2010 corolla
To reset change oil light on Honda sh150i. Have key in off position, hold down the clock change button, while turning the key to on position, continue to hold for 2 sec while change oil light goes off.
To reset the A12 code on a 2010 Honda Odyssey, start by turning the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then back to "ON." The maintenance light should reset, and the A12 code will no longer display.
reset service light on 2010 ml 550
coaster bus how do you reset timing belt light 2010
Reset the device by debugging it.
To reset a 2010 Honda Rancher, first ensure the vehicle is in neutral and the ignition is off. Then, turn the ignition key to the "ON" position without starting the engine, and press the "reset" button on the display until the trip meter resets. This process can also clear any error codes in the display. If you're resetting the maintenance light, consult the owner's manual for specific instructions related to that function.
Seriously Sell the car- Honda has a design defect and will not admit it- I have a $22,000 2010 Honda CRV and the dealer does not have the first clue past putting on a new fuel cap. American Honda told me by phone that they are unaware of the Check Fuel Cap Light problem. This has been going on for years as I read the internet- selling my Honda now before more secrets come to the surface.
5 mil. liters
The abs light is reset with a scan tool after repairing the failure that caused the code.
The airbag light stays on when the computer has detected a malfunction and set a code. The light can not be reset until the failure is repaired.