0
To tighten the AC belt on a Mitsubishi 3000GT, first, locate the tensioner pulley. Use a socket or wrench to loosen the tensioner bolt, then adjust the tensioner to apply more tension to the belt. Once the desired tension is achieved, tighten the tensioner bolt securely. Finally, check the belt's tension to ensure it's not too tight or too loose.
What else can I help you with?
Why is your 2004 Chrysler sebring squeeling at start up in cold weather but stops when you turn the heater off?
If the squeeling is under the hood it is probably the AC belt. If the defroster is on the AC is on. Just tighten the belt. If the squeeling is under the hood it is probably the AC belt. If the defroster is on the AC is on. Just tighten the belt.
How do you tighten the ac belt on a 1994 Nissan pickup xe?
remove skid plat ,then find ac belt tensioner,loosen lock bolt in center,then tighten long bolt until belt has right tension onit ,then tighten lock nut.
How do you tighten the ac belt on a Subaru?
idler pulley is adjustable it rides on the same belt.
How do you adjust AC belt on 93 Nissan pickup with 2.4 liter?
remove bottom skid plate and find ac belt and find ac belt tensioner and loosen center bolt and screw in long bolt to tighten,then tighten lock nut.
What would cause a Mitsubishi 3000 GT to stall when you turn on the AC?
The AC pump is bad. When the AC is turned on the pump tries to turn, because it is bad the extra strain on the motor causes it to stall. Be carely this can break or through a belt. In short its like putting a "brake" on your motor.
How do you tighten the ac belt on a 2001 montero sport 3.0?
It has a serpentine belt with a built in tensioner. You can't tighten it. If it is loose, it needs replacing or the idler pulley is defective, or both.
What is the length of a 2006 ford taurus serpentine belt without ac?
3000 miles
Where is the AC and power steering belt tensioner located on a Dodge Neon?
The alternator will move in and out to tighten the belt and the PS pump will do the same
How do you tighten ac belt in Chrysler 300 2004?
You loosen (1/2 turn) the 15mm nut that locks the idler pulley. Then from under neath you turn the 13mm bolt that will tighten and loosen the belt. Be sure to tighten the lock nut when done.
To replace the ac belt on 1990 dodge spirit?
Replacing the AC belt is probably one of the easiest things to do... Just simply losen the tensioner pulley and remove belt... Install new belt on all the pulleys then tighten the tensioner pulley. Its that easy.
How do you change ac belt on gmc Yukon?
Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.
How do you tighten a belt on a 91 Toyota?
Usually there is a adjusting bolt an the alternator or steering pump or ac pump, u have to loosen the bolts holding the alternator,2, and then tighten the ajusting bolt, if if got no bolt to adjust then use a prybar to push on alternator as u do the belt will tighten, hold it there and tighten the bolts.
