0
To turn off the oil maintenance light on a Lexus GS, first, ensure the vehicle is in the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After that, turn the ignition off and then restart the engine to check if the light has reset. If the light remains on, you may need to repeat the process or consult the owner's manual for further instructions.
What else can I help you with?
Cancel timing belt light on Lexus lx470?
probably have to have a Lexus dealer turn it off
Reset maintenance light on Lexus rx330?
While your ignition is own reset your mileage to the total mileage. Turn the ignition off and then back on while holding in the odometer button until the maintenance light flashes several times and resets.
How do you turn off the 'maintenance required' light on a 2002 Honda Accord EX V6 4 door?
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
How do you turn off Lexus RX400 Maintenance Light?
Make sure the odometer is set to total miles not trip.With the key in the off position, push in and hold the odometer reset button (ODO).Turn the key to the on position without starting the car.Continue to hold down the odometer reset button until the maintenance required light goes off (about 20 seconds). You'll see the bars running across the screen and the light will turn off.
How do you turn off the maintenance light on a 2005 Lexus LS 430?
open the switch with reset button pressed until disapear for 5 secs dont start the engine
How do you turn off the airbag indicator light on the Lexus ES300?
I would unplug the battery. This will reset your clock, etc., but it should turn the light off.
How do you reset maintenance light Lexus lS 430?
Bring the maintenance schedule program onto the information display. Hold the scroll button in until the maintenance schedule is cleared. The maintenance light should go off.
Lexus Maintenance required light for?
From Lexus Web site: This procedure should be used to reset the light when the maintenance has been performed:1. Turn ignition switch to the ON position.2. Set the Odometer / Trip Display to the ODO mode3. Turn the ignition switch to the OFF position.4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.5. The Service Maintenance Reminder Light will: a. Illuminate solidly for 3 seconds. b. Blink for 2 seconds. c. Illuminate solidly for 1 second. d. Turn off.6. Release the Trip Meter RESET button.7. Turn the ignition to the OFF position.8. Turn the ignition to the ON position, and confirm that the Service Maintenance Reminder Light goes out.NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.ignition off, and repeat the procedure from step 1. Depending on the model, this may not work. Your maintenance light is a reminder for every 5000 mile to at minimum have your oil and filter changed.
How do you turn off the maintenance required light on a 2007 Camry?
Turn igniton to on position and put odometer in trip mode, turn off ignition. Hold trip button in and hold it in as you turn ignition to on position, it will flash Turn off ignition. Maintenance light should go and stay off
How do you turn of the Maintenance Required Light on a 2000 Honda Civic Ex?
The maintenance required light only goes on after 7,500 miles since last 'maintenance'. The maintence required light will not turn off by replacing or changing anything, the only way to turn it off is by putting your key in the key slot next to the light.
How do you turn off maintenance light for 2006 Scion xb?
To turn off the maintenance light for a 2006 Scion xB, first, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Finally, turn the ignition back on to verify that the maintenance light has reset. If it remains on, repeat the process.
How do you turn off your maintenance required light off on 2006 Honda Element?
To turn off the maintenance required light on a 2006 Honda Element, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After this, the maintenance light should reset and turn off. If it doesn't, check if the vehicle requires any actual maintenance or consult the owner's manual for further troubleshooting.
