how so you turn on the daytime running lights on a 99 suburban
push in the e brake pedal 1 click
No. Daytime running light can be disabled without affecting turn signals.
You don't they have daytime running lights (they are on when the car is on).
If the Explorer is running engaging the parking brake is supposed to turn the daytime running lights off , otherwise the daytime running lights are supposed to shut off when the engine is shut off . I have a 2004, Eddie Bauer Explorer. On the light switch itself, there is a selection to turn on or off the day lights, as well as the extended, courtesy lights after ignition is turned off.
Because the car is equipped with daytime running lights
Turn headlight switch to the left to turn off daytime runnig lights. Turn switch back to left to turn back on.
I take it you have daytime running lights , if so by engaging the emergency / parking brake the daytime running lights should go off
yes , by removing DRL
Start the van and see if the lights turn on automatically.
To turn off the daytime running lights on a 1995 Volvo 940, locate the fuse box under the dashboard or in the engine compartment. Remove the fuse labeled for the daytime running lights (usually marked as fuse 4 or 5, but check the owner's manual for the exact location). This should disable the daytime running lights. If you're unsure, consulting a professional or the vehicle's manual is recommended for further assistance.
To turn off the daytime running lights on a 1999 GMC Sonoma, locate the fuse box under the dashboard on the driver's side. Remove the fuse labeled for the daytime running lights; this is typically a 10-amp fuse. Alternatively, you can consult the owner's manual for specific instructions related to your vehicle. Keep in mind that disabling daytime running lights may affect your vehicle's visibility to others on the road.