To turn off the wrench light on your 2007 Honda Fit, first ensure that any necessary maintenance has been performed. Then, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds, and the light should turn off. If the light remains on, you may need to consult your owner's manual or a mechanic for further assistance.
To reset the wrench light on a Honda Odyssey after an oil change, turn on the ignition without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn off the ignition. When you start the vehicle again, the wrench light should be reset.
Fill up the fuel tank.
That is the maintenance required light. With the ignition off, push and hold the odometer reset button and then turn the ignition to the on position but do not start the engine. After a few seconds the light will go out.
How do you turn off the check engine light on a 2001 honda accord?
Honda dealer.
That information can be found in your drivers manual. That symbol is reminding you that certain maintenance is required. This info can also be found in the drivers manual.
yes
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
To turn off a 2002 Honda Civic engine light it needs to be reset. Resetting the light can be done by either disconnecting the battery or removing the ECU fuse.
If a turn signal does not blink on a 1996 Honda Accord that it is time for it to be changed. To change the bulb and locate the light housing and remove the older light. Replace the light.
I am not sure about the 2007 model. 2004-200 Models: The answer is in the manual. If you do not have the manual: After you turn on the engine, hold the trip reset button until the service remainder resets.
Two Words------IMPACT WRENCH