answersLogoWhite

0

It is not a difficult task, just time consuming. It looks more complicated than it is. I just completed a 93 pickup and a 95 4runner.

Keep track of your parts and....

Items of note. Make sure you document where every hose into the air chamber is connected. This will cause you a great deal of difficulty when you reassemble the components.

Just use come common sense, take your time and keep track of your parts.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove the temperature controls cover on 2002 Toyota 4Runner?

how do I remove the climate control from a 1999 toyota 4runner


How do you replace an antenna on a 2001 Toyota 4Runner?

To replace the antenna on a 2001 Toyota 4Runner, first, remove the plastic cover at the base of the antenna by gently prying it off. Then, unscrew the antenna from the base using a wrench or pliers, and disconnect any wiring if applicable. Install the new antenna by screwing it onto the base and reconnecting any wiring. Finally, replace the plastic cover to complete the installation.


Oil leaking onto exhaust manifold Toyota Camry?

The oil leak is coming from the valve cover gasket and leaking onto the exhaust manifold, the rubber valve cover gaskets get hard from the engine heat and start to leak, you will have to replace the rubber valve cover gaskets to stop the oil leak


How do you change 1990 oxygen sennsor on a Toyota 4runner?

Just unbolt it and pull it out. Then replace the gasket and reinstall the bolts. If you have a V6 there is a cover that goes with it. On the 4 cyl. You might find it easier to remove the manifold cover.


Toyota 4runner 1995 oil leaks from motor?

In most cases this problem is from excessive oil burnings as well as oil leakage from atop the valve cover's. It would be wise to replace the valve cover gaskets as well as check the oil drain plug for proper placement. However the use of synthetic oil in this engine leaks faster. the use of conventional oil in this case is preferred.


How do you replace license plate lights in a 95 Toyota 4runner?

To replace the license plate lights in a 1995 Toyota 4Runner, first, locate the light fixture above the license plate. Use a flathead screwdriver to gently pry off the plastic cover of the light assembly. Remove the old bulb by twisting it counterclockwise and replace it with a new bulb, then reassemble the fixture by snapping the cover back in place. Finally, test the new lights to ensure they are functioning properly.


Is it hard to replace the valve cover gaskets on a 1998 Toyota Camry?

On 4 cylinder it takes about 20-30 minutes. For V-6 it might take couple hours.


What is the cost to replace valve cover gaskets on 2001 Subaru legacy?

The cost to replace valve cover gaskets on a 2001 Subaru Legacy is about $600. If the work is done at home the cost is only $100 to $200.


How do you replace valve cover gaskets on 5.4 2001 F150?

I'm going to replace the valve cover gaskets on my 5.4. The top bolts their very loose, but hesitant to come out. any thing would help me


How do you change valve cover gaskets on a 01 Cadillac catera?

cadillac catera replace valve cover gasket 1997


Where is the AC fuse located on a 1990 Toyota 4Runner?

The fuse box on a 1990 Toyota 4-Runner is located on the inside just in front of the door. Open the cover on the fuse box, and look at the fuse diagram to locate the AC fuse. Gently pull the fuse out, replace with same amperage fuse and make sure the AC works. Replace the fuse box cover.


How do you replace valve cover gaskets on a 1992 subaru legacy?

Do you still need some assistance?