The cost to replace piston rings in a 2004 Honda Rancher 350 can vary widely depending on labor rates and whether you do the work yourself or hire a mechanic. Generally, the total cost can range from $300 to $800, including parts and labor. If you choose to do it yourself, you may only need to pay for the piston rings and any necessary gaskets, which could be around $100 to $200. Always check with local mechanics for specific quotes.
The cost to replace piston rings on a 2004 Honda Rancher 350 typically ranges from $300 to $600, depending on labor rates and whether additional parts are needed. This estimate includes both the cost of the piston rings and the labor involved in the replacement. Additional costs may arise if other engine components need inspection or replacement during the process. It's advisable to get quotes from local mechanics for a more accurate estimate.
Your piston rings need replaced. One of the two piston rings on a piston is for oil control. This is either worn or broken and needs replaced.
it either needs new rings on pistios or one piston is cracked causing blow by or ... blow by is when compression escapes your piston..
you take the top off then take the piston with the shaft out and put new rings lol its easy im 11.
There's no point in replacing the piston rings. You have to completely remove and disassemble the engine in order to reach the rings. In light of the fact that you didn't know this, you should have the ENGINE replaced by a qualified technician.
The piston rings create a seal between the piston and the cylinder wall.
http://www.lings.com http://www.Cmsnl.com Lings have the pistons and rings, pistons are 9 pounds and rings are 37 pounds
theres a possibly two way. Either there are deep groves in the piston wall or your piston rings are bad and need to be replaced.
the rings are probably bad and need replaced
h22a motors are oil burners. most likely its the valve seals, or piston rings. in my case it was the piston rings though. the sleeves on the h22 is way to hard of material and it wears down the rings really fast. try some aftermarket rings if you plan on replacing them
Gently, they break easily. They also make tools to R&R piston rings to avoid breaking the rings.
Float needle sticks in carb and allows excess fuel to seep past rings into oil.