The cost to align the steering wheel on a Lexus LS400 typically ranges from $75 to $100, depending on the service facility and location. This price may vary based on additional factors, such as the need for a complete wheel alignment or any necessary repairs to suspension components. It's advisable to get a quote from your local mechanic for the most accurate pricing.
1991 Lexus ls400 hard steering at ilde rack &pump have been replace all screencleaned or removed.
What is the problem when at idle I have hard steering? I just replaced the rack.
How do you fix a rear wheel bearing for a Lexus ls400
Low on steering pump fluid or a lose belt
Changing a wheel bearing is almost exactly the same process for every vehicle.There are detailed instructions to do this answered in another question:How_do_you_change_a_wheel_bearing
The air pump on the 1992 Lexus LS400 is located on the passenger side front of the engine compartment under the air filter housing. You also have to remove the right front tire and plastic wheel well inner cover to get to it and the valve for the front shocks.
When you have the front end aligned the mechanic should align the steering wheel also. This is so the steering wheel is positioned straight when you're driving straight down the road.
take it back they didn't align it right
To replace the bumper on a 1991 Lexus LS400, first, ensure the car is parked on a flat surface and disconnect the battery. Remove any screws or clips securing the bumper to the vehicle, typically located around the grille, wheel wells, and under the car. Carefully pull the old bumper away from the body, and then align and attach the new bumper using the same screws and clips. Finally, reconnect the battery and check for proper alignment and fit.
Yes, I am sure some will not sure if All will. Case in point: My buddy has a 1991 LS400 and got a flat. I have a 1999 GS400 and the wheel bolted right up!
Yes, there is a D-pad on the left hand side of the steering wheel just for such an action.
Disconnect battery and wait at least for 30sec. Loosen two hex bolts from behind st wheel to release airbag, disconnect wiring, unscrew centre bolt and pull wheel from its position. Note: before removing: align steering wheel strait and mark position on shaft then will be easier to align on replacement.