Where is the starter on a 1997 Honda Civic?
I found four little metal clips oround the housing but after that it was still on there very well. besides heating it up to melt the glue i would say replace the thing, they're pretty cheap at a wrecker... hope i helped.
about $4000-$12,000 depending on how bright you want it
I am having the clutch in my 95 civic dx replaced today. It is going to cost me about $980. Not sure if yours would be more or less.
I would say around 300 dollars..
Pull it out, take it to a radiator shop and have them do it. Or what I would do , is just replace it with a new aftermakret one.
Accel oil seal. 4 oil seal must be replace
You will need the intake and exhaust manifold gaskets. I would also install new head bolts.
This is a process that should be done by an experienced person. Would be a lot better to be shown how its done by someone who knows what their doing, not told how.
The entire brake can be difficult but the brake pads are easy. I would trust a mechanic to do the entire brake at your local garage.
paper clips
No. There are 2 U joints, 1 front and 1rear. If they are the factory U joints they are sealed with a plastic meaning no clips on driveshaft side. If you are not of high mechanical ability I would take it and have it done.