0
on the valve cover the bolts going around the edges of the cover all need to come off. be careful in that some of the bolts may be longer than others. i have found if u let the vehicle sit for a little bit and let the oil drain back into the oil pan there is no mess involved. take the cover off and you'll have to get all of the old gasket off of both the bottomside of the cover and where the cover goes on. i usually use a razor blade for this. scrape towards the outside to keep gasket matter from getting into the springs ,or cover all of them with rags. put the new gasket on the cover .i use silicone to keep it from moving around when lining it back up.check the torque specs for the bolts when putting it back on .
What else can I help you with?
How much should a valve cover gasket repair for a 1996 Nissan Quest for a 1996 Nissan Quest?
dosent make sence because its the same car
How do you replace a 2000 Nissan Quest valve cover gasket?
To replace the valve cover gasket on a 2000 Nissan Quest, first disconnect the battery and remove any components obstructing access to the valve cover, such as the air intake and ignition coils. Next, unbolt the valve cover and carefully lift it off, ensuring no debris falls into the engine. Clean the mating surfaces thoroughly, then place the new gasket on the valve cover, reassemble the parts in reverse order, and tighten the bolts to the specified torque. Finally, reconnect the battery and check for any leaks after starting the engine.
How do you change the rear valve cover gasket on 2000 Nissan Quest?
To change the rear valve cover gasket on a 2000 Nissan Quest, first, ensure the engine is cool and disconnect the negative battery cable. Remove any necessary components obstructing access to the rear valve cover, such as the intake manifold or other hoses. Once exposed, unbolt the valve cover, carefully lift it off, and remove the old gasket. Clean the mating surfaces, place the new gasket on the cover, reassemble by reversing the process, and ensure all bolts are torqued to specifications.
How do you replace the valve cover gasket on your 2002 Mitsubishi lancer?
how do you replace the valve cover gasket on a 2002 mitubishi lancer
How do you replace the valve cover gasket on a 2004 Jeep Liberty?
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
How do you replace valve gasket for 1995 Nissan pickup?
To replace the valve gasket on a 1995 Nissan pickup, first ensure the engine is cool and disconnect the battery. Remove the valve cover bolts and gently lift the valve cover off, taking care not to damage any components. Clean the surface where the gasket sits, then place the new gasket onto the valve cover and reattach it, tightening the bolts to the manufacturer’s specifications. Finally, reconnect the battery and check for leaks after starting the engine.
How do you replace oil cover gasket?
What is a oil cover
How do you replace the valve cover gasket on a S40 Volvo?
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
What is wrong with a 1993 Nissan sentra that has oil on the engine?
More than likely you have a valve cover leak. You probably need to replace the gasket(s).
How do you torque valve cover when you replace gasket on 1989 Nissan 240 sx?
Tighten each one uniformly just until they stop, any further and you squeeze out the gasket, any less and it leaks.
How do you replace the valve gasket cover on a 1984 f 100?
simply remove the valve cover gasket,take the old one off,clean the area well, and replace the gasket,tighten the cover evenly.(if ur gasket is made of corque take care not to break the gasket
How do I change the valve cover gasket on a 2001 Toyota Rav4?
how to replace valve cover gasket toyota rav4 2001
