There is a hose that parallels the fuel filter, it plugs into the fuel rail just to the left of the fuel filter feed line. Take off that hose install another hose onto the rail, that plugs into the IN port on the FMU and the hose you pulled off earlier goes onto the out. Then attach a boost line from behind the intake maniforld and you are good to go.
Is a 1995 Nissian 240SX Engine compatible to 1992 Nissian 240SX?
Absolutely.
Wat are the tps volt settings for a 1992 Nissan 240sx
no, they will not fit. they are 2 different body styles
Yes the two transmissions are interchangeable.
Dispite the different motors the transmissions are infact the same.
Yup, the bell housings are exactly the same.
Yes, some '92 240sx' came with the ka24de motor.
Begin by removing the wiring harness from your 1992 Nissan antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.
on the dampener pulley
To install a thermostat in a 1992 Nissan 240SX, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose connected to the thermostat housing. Take out the old thermostat and gasket, clean the mating surfaces, place the new thermostat in the housing (ensuring it's oriented correctly), and install a new gasket or use RTV sealant. Finally, reattach the hose, refill the coolant, and reconnect the battery.
jus unscrew the old one