There are two ways to do it:
Removing the engine/transmission unit and do the replacement on the bench, or from under the car removing the transmission.
For the later, there's a good step by step pictorial guide:
http://www.miata.net/garage/clutch2.html
you will need to remove either the engine or the transmission(engine is easiest in the 94 escorts) replace the clutch and put the engine back in
answer remove 2 clutch pedal bolts and pin,remove the reservoir unscrew the fluid pipe,install the new one then bleed it very well
To replace the clutch on a 1994 Isuzu Trooper, first, disconnect the battery and remove the transmission by unbolting it from the engine and separating it from the transfer case. Next, remove the old clutch assembly, including the pressure plate and flywheel, and clean the mounting surface. Install the new clutch disc and pressure plate, ensuring proper alignment, and then reattach the transmission. Finally, reconnect the battery and test the clutch operation.
To replace the clutch master cylinder on a 1994 Ford Probe, first, disconnect the battery and remove the engine cover if applicable. Next, locate the clutch master cylinder on the driver's side, disconnect the hydraulic line and remove the retaining bolts. Install the new master cylinder by securing it with the bolts, reconnect the hydraulic line, and bleed the clutch system to remove any air. Finally, reconnect the battery and test the clutch operation.
To replace the clutch in a 1994 Toyota truck, start by disconnecting the battery and removing the transmission. You’ll need to remove the driveshaft, exhaust components, and any other parts obstructing access to the transmission. Once the transmission is out, you can remove the old clutch assembly and replace it with the new one, ensuring to align it properly. Finally, reassemble the components in reverse order and reconnect the battery.
What exactly do you want to know about "Air conditioning clutch on a 94 ford aerostar van?" How to replace? What engine do you have, etc.?
Miata owners typically replace the transmission fluid with 2 quarts of MTL Redline Synthetic Gear Oil.
Remove tank, remove sending unit, replace pump, replace tank.
To replace the blower motor in a 1994 Miata, first disconnect the negative battery cable for safety. Remove the passenger side dashboard panel and the glove compartment to access the blower motor housing. Unscrew the motor from its housing, disconnect the wiring harness, and replace it with the new motor. Reassemble everything by reversing the disassembly steps, ensuring all connections are secure.
The transmission has to come out to replace the clutch. This is defiantely not a job you want to try for yourself unless you know your way around transmissions and drive axles.
yes just replace the fan clutch assembly
fairly simple, hardest part bout the whole job is disconnectin the clutch line without breaking it