answersLogoWhite

0

To replace the harmonic balancer on a 2004 Mazda 6, first, disconnect the negative battery cable and remove the drive belts. Then, remove any components obstructing access to the harmonic balancer, such as the crankshaft pulley. Use a puller tool to carefully detach the old balancer from the crankshaft. Finally, install the new harmonic balancer, ensuring it's properly aligned, and reassemble all components before reconnecting the battery.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Related Questions

What is the stock speaker size on a 2004 Mazda b3000?

stock speaker size for the mazda b3000 04 is 6x8


Where is the neutral safety switch on 2004 Mazda 6?

park/neutral switch mazda 6 04 is just above bottom gearbox mount !


How do you reset your 04 Mazda 6 Bose stereo?

Disconnect your battery, reconnect, voila.


What puller do you need to remove crank pulley on 04 kia rio?

To remove the crank pulley on a 2004 Kia Rio, you will need a harmonic balancer puller or a crankshaft pulley puller. This specialized tool is designed to grip the pulley securely and apply even pressure to remove it from the crankshaft. Make sure to follow the manufacturer's instructions for proper use to avoid damaging the pulley or surrounding components.


04 Mazda tribute timing chain or belt?

The 2004 Mazda Tribute is equipped with a timing belt, not a timing chain. It's important to replace the timing belt at the recommended intervals, typically around 60,000 to 100,000 miles, to prevent engine damage. Regular maintenance can help ensure the vehicle runs smoothly and efficiently.


What does it cost to replace a clutch on a 04 civic?

Civic 04 as per dealer parts + labour = $916


How replace the ABS control for Honda Pilot 04?

how replace the ABS control for Honda pilot 2004


My 04' Mazda rx8 dash light is on it looks like a fence what does it mean?

it means your low on radiator fluid


Would anyone know if a 04 Mazda 3 steel rim has the same bolt pattern as a 07 Mazda 3?

yes. all new Mazda rims are a 5X114.3mm. its more cost effective to use a lot of the same parts on different cars.


Will a 5.7 l hemi from an 05 Durango engine replace the 5.7l hemi in your 04 Durango?

yes. 04-06 same 04-09 is same


How do you replace the passenger side low beam on a 2004 Mazda 6?

I have had to replace the low beam bulbs on my 04 maz'6. It can be done. In your owners manual you'll find the indicator to which is the burnt out bulb, follow that wire to the connection and twist and pull, the bulb should come out. good luck, hopefully you have small hands to fit in those tight areas.


04 Mazda rx8 is doing 3500 to 4000 rpm around 30-40 mph is that normal?

That Depends On What Gear You Are In.