To replace the starter in a 1998 Hyundai Tiburon, first disconnect the negative battery terminal to ensure safety. Remove the intake manifold or any components obstructing access to the starter, then unbolt the starter from its mounting bracket and disconnect the electrical connections. Install the new starter by reversing the disassembly steps, ensuring all connections are secure, and finally, reconnect the battery terminal. Double-check that everything is properly installed before starting the engine.
No... 1999 to 2001 will work only for those model years. we tried sticking a 98 into a 2001 and it fits but won't work because of the sensors
You need a new starter, or a new ring gear. Or both.
do you have the schematics for a '98 softail starter?? do you have the schematics for a '98 softail starter??
On a 98 venture the starter is located in front and just under radiator. Simple to reach and change. I learned the hard way.
replace every 90k kl or 60k kl if driving hard don't wait for it to go as you damage the engine if it brakes
98 Toyota Camry Starter Installation
To replace a starter in a 1985 Olds car, raise the front end of the car with a jack, Next, remove the two support bracket bolts at the transmission and pry the support bracket away slightly to obtain access to the starter bolts.
i need diagram for a starter a 98 ford contour
starter on this car should be simple 12pt metric socket and wrench set range from 10mm- 19mm and a pair of jackstands or ramps
Disconnect the - battery cableRaise and support vehicleRemove wiring harness at starterRemove mounting boltsRemove starter Disconnect the - battery cableRaise and support vehicleRemove wiring harness at starterRemove mounting boltsRemove starter
does anyone know where a starter is located on a 98 acura 3.5 RL
The solenoid is on the starter.