How do you reset maint read light on 2010 corolla
To reset the maintenance required light on a 2010 Scion xB, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After releasing the pedal, the maintenance light should turn off. If it doesn't reset, repeat the process.
reset service light on 2010 ml 550
coaster bus how do you reset timing belt light 2010
Reset the device by debugging it.
The 2010 Toyota Sequoia has a V8 engine.
The 2010 Toyota Sequoia has 32 valves.
The 2010 Toyota Sequoia is a gas-powered vehicle.
"you push the Trip Odometer button until the total miles (not trip miles) is displayed. Then turn off the car and hold the Odometer/Trip Odometer select button donw while you push the Power Button twice to get to Ignition On and continue holding the Odometer/Trip Odometer for five additional seconds."In the case of our 2010 RAV4, a mobile mechanic in orange county, ca was reseting for me today the odometer had to be in the "trip A" not the ODO vehicle miles displayed,tried it three times with the ODO displaying total miles and it would not reset, then did the same procedure but had the ODO in trip "A" and it worked first time perfectly.You will know it worked because the "maint" light will flash and then go out, shut off the ignition and start the car to confirm it has reset (the "maint" light will go out after starting the car).
The height of the 2010 Toyota Sequoia is 6 ft. 2.6 in. (74.6 in.).
The 2010 Toyota Sequoia has a 27 degrees angle of approach.
The curb weight of the 2010 Toyota Sequoia is 5680 lbs..