On a 1996 Toyota Prado the dash board is removed & one will find a reset button with the letter "T", this button is switched off. Once this is done the T-Belt light should be reset & you will no longer see the T-Belt symbol lit up on the dash.
If you have already replaced the belt and the light is still on you will need to remove the lower and upper dash panels and then remove the instrument cluster which holds your speedometer and other devices. The reset button for the timing belt light is behind the cluster.
To reset the timing belt (t belt) light on a 1999 Toyota Prado, start by turning the ignition key to the "ON" position without starting the engine. Then, press the gas pedal fully three times within five seconds. Finally, turn off the ignition and start the vehicle to confirm that the light has reset. If the light remains on, repeat the process to ensure it was done correctly.
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
I have 04 hiace. T belt liht on. Have removed dash can not find screews every one talking about and have tried pressing the reset on the front but no luck.
Hi I have cruiser 2008 gxr how is reset t.belt light
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
Timing belt replacement time.
To reset the timing belt (t-belt) light on a 2014 Toyota Hiace with the 2KD engine, first, turn the ignition to the "ON" position without starting the engine. Then, press the odometer button until the display shows the trip meter. Finally, while holding the button, turn the ignition off and then back to the "ON" position, and the light should reset. Make sure to release the button after the reset is complete.
To remove the timing belt light in a Toyota Innova, first, ensure that the timing belt has been replaced, as the light typically indicates that maintenance is due. After replacing the timing belt, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds to reset the light. Finally, turn off the ignition and restart the vehicle to confirm that the light is no longer illuminated.
You would need to reset the on-board computer if it does not automatically reset when the malfunction itself is corrected.