You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
timing belt light hilux 1kd
how to reset toyota kdn165 timing light
see hpoc.co.uk for a post on this very question
There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
To reset the timing belt light on a 2000 Toyota Hilux D4D, you typically need to locate the trip meter reset button on the dashboard. Turn the ignition key to the "ON" position without starting the engine, then press and hold the trip meter reset button until the timing belt light turns off. If the light does not reset, you may need to disconnect the battery for a few minutes and reconnect it. Always consult the owner's manual for specific instructions related to your model.
To reset the timing belt light on a 2003 Toyota Hilux 2.8 diesel, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds to reset the light. Turn off the ignition and then start the engine to ensure the light is reset. If the light remains on, you may need to consult the vehicle's manual or a professional mechanic for further assistance.
To turn off the timing belt light on a Toyota Hilux, first ensure that the timing belt service has been completed. Then, use an OBD-II scanner to reset the service light, or if you don't have one, turn the ignition to the "On" position without starting the engine and press the gas pedal three times. This should reset the light. If the light persists, consult a mechanic for further diagnostics.
To turn off the timing belt light on a 1993 Toyota Hilux, first, ensure that you have completed any necessary maintenance related to the timing belt. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the battery, and the light should be off. If the light remains on, consult a mechanic for further diagnostics.
Pull the dashboard apart. Others you can simply reset the ignition module by a sequence, but this one you have to reset it manually on the inside.
To reset the timing belt light on a 2004 Toyota Hilux, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn off the ignition and start the engine to check if the light is reset. If the light remains on, the procedure may need to be repeated or checked for any underlying issues.
The easiest way to reset the timing belt indicator lamp in your Toyota automobile is to remove the fuse for the indicator lamp. Keep the fuse out for approximately 30 seconds. Put the fuse back in and the indicator light should be off.
how do i reset timing belt light on 1hz