There are a couple of ways to reset the timing belt light on a 2008 Toyota Hilux diesel. One way is to unplug the battery for up to five minutes and see if that will reset the light. If not, you can hold the trip meter button down and turn the key, but not start the vehicle. This will reset the light most of the time.
To reset the timing belt light on a 2003 Toyota Hilux 2.8 diesel, first, turn the ignition key to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds to reset the light. Turn off the ignition and then start the engine to ensure the light is reset. If the light remains on, you may need to consult the vehicle's manual or a professional mechanic for further assistance.
timing belt light hilux 1kd
To reset the fuel filter warning light off for the Toyota hilux one must replace the filter that switch the car on and off. They must also click the rest button.
how to reset toyota kdn165 timing light
see hpoc.co.uk for a post on this very question
The airbag light is on because the airbag module detects a problem with the system. Fix the problem and the light will go out by itself.
To reset the timing belt light on a 2000 Toyota Hilux D4D, you typically need to locate the trip meter reset button on the dashboard. Turn the ignition key to the "ON" position without starting the engine, then press and hold the trip meter reset button until the timing belt light turns off. If the light does not reset, you may need to disconnect the battery for a few minutes and reconnect it. Always consult the owner's manual for specific instructions related to your model.
Pull the dashboard apart. Others you can simply reset the ignition module by a sequence, but this one you have to reset it manually on the inside.
You will first need to properly reset the light. If this does not reset the light, then you may have to manually press it.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
To turn off the timing belt light on a 1993 Toyota Hilux, first, ensure that you have completed any necessary maintenance related to the timing belt. Then, disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the battery, and the light should be off. If the light remains on, consult a mechanic for further diagnostics.
How do you reset engine light on jeep liberty diesel