0
What else can I help you with?
Where do you add brake fluid in a 1990 Mazda protege?
To add brake fluid in a 1990 Mazda Protege, you need to locate the brake fluid reservoir and check the levels. The reservoir is located on the master cylinder for the brakes.
Where is the tns relay on a 90 Mazda roadster?
The TNS relay on a 1990 Mazda Roadster is located on the drivers side of the car. It will be right beside the brake.
How do turn off the parking brake light in 1990 Chevy Astro?
When the brakelite switch fails it fails to on. Replace the brakelite switch. Located under the dash on the brake pedal arm. You will see a push switch that is released when the brake is pressed. Just replace that switch.
Why is the brake pedal hard on 1990 mark 7?
The power brake booster is probably at fault.
Location of flasher on a 90 Mazda MVP?
The flasher on a 1990 Mazda MVP is located under the dash on the driver's side. It is just above and to the left of the brake pedal.
Why you have no power to electric window switch on 1990 Mazda rx7?
blown wire/fuse
How do you remove old rear brake pads from 1990 Mazda miata?
To remove the old rear brake pads from a 1990 Mazda Miata, first, lift the car and secure it on jack stands. Remove the rear wheel and locate the brake caliper. Unbolt the caliper using a socket wrench, then slide it off the rotor. Finally, remove the old brake pads from the caliper bracket, noting their orientation for installation of the new pads.
1990 cutlass left brake light fails to come on does slightly blink in sync with right brake light when rear park running lights are on in order to see the left brake light blink slightly?
its a ground wire
If the brake lights are out in a 1990 Honda Civic LX and the bulbs are new what do you do next?
check fuses, and then check for power to the bulbs check for power in and out of brake switch
What bolt do you take off to change front brake pads on 1990 Mazda 626?
you need to take off both caliper bolts and remove the caliper from the carriage... most Mazda calipers will not pivot...
What Brake Fluid for 1990 Mazda 323?
For a 1990 Mazda 323, you should use DOT 3 brake fluid. This type of fluid is compatible with the braking system of the vehicle and ensures proper performance. Always check the owner's manual for any specific recommendations and maintain the fluid level as needed. It's also important to use fresh fluid to avoid moisture contamination.
Transmission in a 1990 Mazda rx7 convertible automatic?
Yes, there is a transmission in a 1990 Mazda RX7 convertible.
