answersLogoWhite

0

Remove the pull strap by removing the cover (it slides up towards the rear window). Next, remove the Phillips screw holding the strap assembly. Use a screwdriver (cover it with a cloth so it doesn't scratch the paint) to pop out the panel from the fasteners. It seems intimidating but I just did it and it is fairly easy.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you change the passenger mirror on a 2000 Toyota Sienna?

You need to remove the inside door panel, then remove the bolts that secure the mirror. It is very simple procedure.


How do you remove the inside door panel of a 1998 Toyota Sieana Van?

We have a fix for this problem that anyone can do - includes testimonials! http://www.findonefindall.com/toyota-sienna/index.htm See full details under "How do I replace the passenger side mirror on 2000 Toyota Sienna?


Where is the tire jack for 2005 Toyota sienna awd?

mine is a 2WD model, but if it's the same, have a look on passenger side access panel immediately inside rear hatch.


How do you remove the rear door panel on your Toyota Sienna 2000?

the lower panel is held on with push on clips, 11 of them that can be "gently pried up" according to the service manual. remove the handle and strap prior to removal.


How do you remove the interior panel on the hatch of a 5-door 1998 Toyota Corolla?

To remove the interior panel on the hatch of a 1998 Toyota Corolla, first, ensure the vehicle is turned off and the hatch is open. Use a flathead screwdriver or trim tool to carefully pry off any plastic clips or covers concealing screws. Remove the screws, typically located around the edges and possibly near the handle. Finally, gently pull the panel away from the hatch, being cautious of any remaining clips or wiring connected to it.


How do you change the rear hatch handle of 2004 Toyota sequia?

To change the rear hatch handle on a 2004 Toyota Sequoia, first, open the rear hatch and remove the interior trim panel by unscrewing any screws and unclipping the fasteners. Once the panel is off, disconnect the electrical connector for the handle if applicable, then remove the bolts securing the handle to the hatch. After that, install the new handle by reversing the removal steps, ensuring everything is securely fastened before reattaching the trim panel.


Where is the power sliding door module on a 2001 Toyota Sienna?

The Poer Sliding module is loctaed in the Right rear quarter panel. You will have to remove the trim to access it.


Access door speaker sienna?

remove the door panel


Where is the turn signal flasher located on a 1999 sienna?

The flasher on a 99 Toyota Sienna should be beside the instrument panel fuses under the steering column. You will probably have to remove the driver's side knee bolster to get at it, which is kind of a pain.


Where is the fuse panel on a 2000 Toyota Sienna?

1) look to te left of the steering column. 2) notice the coin box 3) remove said coin box 4) fuse panel should now be visible :)


How do you open drivers door panel on 2005 sienna?

;how to remove drivers door panel to repair door restrictor


How do you remove the passenger door panel in an a Toyota avensis?

toyota avensis 2004 how to remove door panel from passanger side front door