answersLogoWhite

0

how do you replace rack and pinion seals on a 2003 Hyundai santa fe

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you fix 2003 expedition rear differential pinion seal leak?

remove rear drive shaft. remove pinion yolk from front of diff.remove oinion seal replace with new one. replace pinion yolk, replace driveshaft,.. dhceck ujoints of drive shaft while out, its a good time to replace them


How do you replace the pinion bearing and seal on a 02 mountianieer?

to replace pinion bearing and seal you need to remove drive shaft.you then remove the pinion nut from pinion shaft. u usually need a pretty good rattle gun to remove this .then remove yoke from front of differential.u may need a puller but usuall tapping with hammer will loosen it. remove the bearing and replace with new one then install seal and replace cover and ypke. replace pinion nut, fill with oil.replace drive shaft


How do you replace pinion seal on 2006 crown Victoria?

Old out, new in


How do you replace the pinion shaft seal on your F-350 dually?

to replace pinion shaft seal you need to drop the drive shaft from the rear end then with large socket remove pinion nut from front of yoke remove yoke remove old pinion seal install new pinion seal reinstall yoke and pinion nut to specified torque re install drive shaft note now is the time to check and see if U-joints need replacing


How do you replace the pinion shaft seal on your F 350 dually?

to replace pinion shaft seal you need to drop the drive shaft from the rear end then with large socket remove pinion nut from front of yoke remove yoke remove old pinion seal install new pinion seal reinstall yoke and pinion nut to specified torque re install drive shaft note now is the time to check and see if U-joints need replacing


How do you replace pinion seal?

Some of those setups have a crush sleeve that must be replaced along with that seal. It also requires specific torque specs To replace seal, remove the drive shaft, remove the pinion nut and crush sleeve if required, remove seal, install new seal and crush sleeve install pinion nut and torque to specs


Changing rear differential pinion seal on 2003 dodge quad cab 1500 and the torque specs for pinion nut?

210ft. lbs.


How do you replace the pinion seal on the rear end of a 1970 Chevelle?

Best left to a mechanic as the drive shaft has to come down and the big nut on the pinion gear that holds the drive shaft mount has to come off and then you can install the new pinion seal.


What to do if your Ford f 150 is leaking fluid from differential yoke?

The pinion seal is shot. A mechanic can replace the seal and check for problems.


How do you replace a pinion seal?

Remove driveshaft,remove pinion nut that holds the driveshaft yoke on. Then remove the yoke and the seal will be behind the yoke.To pull the seal you need a seal puller or you could use a couple of screwdrivers to pry it out of the axle housing. Install seal & asm in reverse order.


How do you replace rear pinion seal on a 2005 dodge ram 2500 diesel?

To replace the rear pinion seal on a 2005 Dodge Ram 2500 Diesel, first, safely lift the vehicle and support it on jack stands. Remove the driveshaft by unbolting it from the rear differential and marking its position for reinstallation. Next, use a socket to remove the pinion nut and pull the yoke off, exposing the old seal. Carefully pry out the old seal, install the new seal, reassemble the yoke, and tighten the pinion nut to the manufacturer's specifications before reattaching the driveshaft.


How do you change pinion seal on 2005 Ford Explorer?

how to cahange front pinion seal