0
Its actually very simple to replace the truck struts on a Mazda all you need is a Phillips head screw driver and a good pair of vice grips. first you will need to remove the retaining clips on the top and bottom of the gas shock. Then simply use the screw driver to pry off the gas shock insert the clips from the old gas shocks then using a plastic hammer pop the new gas shocks onto the mounts on the deck lid and body of the car.
Its actually very simple to replace the truck struts on a Mazda all you need is a Phillips head screw driver and a good pair of vice grips. first you will need to remove the retaining clips on the top and bottom of the gas shock. Then simply use the screw driver to pry off the gas shock insert the clips from the old gas shocks then using a plastic hammer pop the new gas shocks onto the mounts on the deck lid and body of the car.
What else can I help you with?
How do you change trunk struts in o3 jetta?
Weak trunk struts on a 2003 VW Jetta will not allow the lid to properly stay open. To replace the struts unbolt the mounts holding them to the car and replace them.
How do you replace the trunk struts on my sc300 Lexus?
To replace the trunk struts on your Lexus SC300, first, ensure the trunk is supported to prevent it from falling. Use a flathead screwdriver to gently pry off the retaining clips on each end of the struts. Once the clips are removed, detach the old struts from the mounting points and replace them with the new struts, ensuring they are securely attached. Finally, reattach the retaining clips to complete the installation.
How do you replace the rear struts on a 2005 Mazda RX8?
To replace the rear struts on a 2005 Mazda RX-8, start by lifting the vehicle securely and removing the rear wheels. Then, locate the strut assembly and remove the bolts connecting it to the wheel hub and the top mounting bolts in the trunk area. Carefully detach the old strut and replace it with the new one, ensuring all bolts are tightened to the manufacturer's specifications. Finally, reattach the wheels and lower the vehicle back to the ground.
How do you change the trunk struts in 2001 eclipse?
You will need a torx adapter (I don't remember the size). After that make sure that the trunk is supported by something. Because it's very heavy, and you do not want it to fall on your head. Then replace the struts one at time. Always change the struts in pairs.
What the shocks called that hold open the trunk of a 2008 sebring convertible?
Trunk props,or prop rods. They are "gas struts"Trunk props,or prop rods. They are "gas struts"
What specific struts should you buy to replace the front ones on 2002 Mazda Protege 5 I need to replace both front struts but want to ensure that I am buying the exact type required. Thanks?
if doing yourself just buy quick struts for the car if they make them for that model they cost more but they save a lot of time gas charged struts are junk
Do you always replace both struts?
When replacing struts, ALWAYS replace them in pairs.
Does a Mazda tribute have shocks or struts?
both
What other struts will fit 2000 Mazda millenia?
2001 Mazda millenia
How do you replace rear struts for a 1999 Subaru Forester?
hou to replace rear struts
What are the shocks called that holds open your trunk?
Trunk props,or prop rods. They are "gas struts"
How do i change struts on trunk of 2008 dodge avenger?
To change the trunk struts on a 2008 Dodge Avenger, start by opening the trunk and supporting it with a prop to prevent it from closing unexpectedly. Use a flat-head screwdriver to pry off the retaining clips on both ends of the struts, then remove the old struts by pulling them off the ball joints. Attach the new struts by pushing them onto the ball joints and securing them with the retaining clips. Finally, test the trunk to ensure it opens and closes smoothly.
