long life antifreeze coolant or and equivalent
To remove the intake manifold on a 2004 Mitsubishi endeavor, you should take it to a mechanic. An authorized dealer will also fix it for you.
The 2008 Mitsubishi Endeavor typically requires a coolant that meets the Mitsubishi specification for ethylene glycol-based antifreeze. It's recommended to use a 50/50 mixture of antifreeze and distilled water, preferably a long-life coolant that is compatible with aluminum engines. Always check your owner's manual for specific recommendations and guidelines to ensure optimal performance.
Step on the brake, press the lock on the 'Shift Stick' and push it to 'Park'.
Take 2 screws out and pull light straight back, it will come over, replace bulbs and put back on and replace screws
You have to use a key to take tire off
To repair the horn on a Mitsubishi Lancer 2004 you should take your vehicle to the mechanic. You can also take it to the accredited dealer in the same.
Well the v6 engine will require you to take the intake off to get to the rear plugs but other than that it is pretty much the same
A 2005 Mitsubishi Endeavor typically requires 5W-30 viscosity grade motor oil. It's important to use oil that meets the API (American Petroleum Institute) certification standards for better engine performance and protection. Always check the owner’s manual for specific recommendations and any updates from the manufacturer.
18.7 liters in a radiator flush and fill in a 2004 Dodge Ram 1500.
at the paint shop you got it done at or at the dealership you bought it from if they dont resolve it then you can take them to court.
The pressure switch is located on the back of the power steering pump which is on the passenger side of the car at the rear of the engine. You can reach it from top or bottom but I found, to take it out it is easier to reach from under the car. It is the only part of the power steering pump that has a wire going to it.
Dexcool don't use any other type