its built into your water pump.
get a smaller pulley for the engine. as far as clutch I'm not sure
To replace the AC clutch and pulley on a 2002 Ford Explorer Sport Trac, first, disconnect the negative battery cable and remove the serpentine belt. Then, use a suitable puller to remove the clutch from the AC compressor, followed by the pulley. Install the new pulley, followed by the clutch, ensuring proper alignment, and reattach the serpentine belt. Finally, reconnect the battery and check the system for proper operation.
just above the ac clutch
You will a lot of special tools as well.. Remove the A/C compressor Remove the A/C clutch disc and hub retaining bolt. Remove the bolt. Remove the A/C clutch disc and hub spacers. Remove the pulley snap ring. Remove the A/C clutch pulley. Remove the A/C clutch field coil.
Turn the fan clutch counterclockwise and use a pulley wrench to keep the pulley from turning. An air hammer will make it easier to get off.
Yes it takes a 36mm wrench and a holder for the pulley to remove the fan clutch,
You just attach it and use it on the fan clutch.
if you do not have no experience in fixing car, do not do it
The fan clutch and pulley are attached to it.
It should be right on the front of the compressor - usually the clutch is inside the v-belt/serpentine pulley on the compressor
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
Auto Zone or any parts store that loans tools should have a fan clutch tool. it holds the pulley while you loosen the fan clutch nut