It is the brakes light switch
The 1997 Toyota Avalon stop light switch simply plugs in and out. Take hold of the stop light switch and pull outward. Plug the new stop light switch in.
stop light switch is located above brake pedal under dash
If you are referring to the stop light switch,it is under the dash near where the brake pedal pivots.When you push on the brake pedal, the stop switch pops open and completes a circuit to the stop light lamps.
most common cause is a burned out light bulb, if not the bulb,check fuses and stop light switch
check light bulbs, check stop light fuse,check stop light switch
How do you install a stop light switch on a 1972 cougar
Stop watch and a light switch
The easiest way to remove an old brake light switch(also called stop light switch) is to break it off. Simply wedge a screwdriver between the switch and the metal bracket and twist. It will pop right out. The switch has 4 ledges that lock the stop-light switch into place. It's very difficult to remove without breaking it.
To change the stop light switch on a 1993 Chevy Caprice, first disconnect the negative battery cable to ensure safety. Locate the stop light switch, which is typically mounted on the brake pedal assembly. Remove the connector from the old switch, unscrew the switch from its mounting, and then install the new switch by reversing the process. Finally, reconnect the battery and test the brake lights to ensure proper functionality.
We found the relay check lamp was the problem after replacement of vehicles stop light switch.
The stop engine light might not come on on your N14 Cummins when the switch is off.
the switch is located at the top back of brake pedal!!