4 x 100 mm
5x114.3
5x114.3
No, different bolt pattern.
Any cars that have a 5x114.3 bolt pattern.
They're 14x5.5 (4x100 bolt pattern) stock.
I believe regardless of what market and trim level it was in, the 5th generation Honda Prelude ('97-'01) had a 5x114.3 bolt pattern. The 4th generation ('92-'96) had a 4x114.3 bolt pattern.
If you are refering to the pattern of the wheel studs, it is 4x100
Honda Prelude 1979-1991 have the same bolt pattern so they will "fit". Then it just depends on the width of the wheel and the offset (the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel). Honda Prelude 1992+ wheels will not fit.
no u cannot do that bolt pattern is different
It should. There's very little mechanical differences when the mid-cycle refresh took place in 1990. Most of it was cosmetic, and the B21 series motor that replaced the B20 in the 1988-89 model years should still bolt on the same.
To replace the speed sensor on a 1990 Honda Prelude, first, disconnect the negative battery terminal to ensure safety. Locate the speed sensor, which is typically mounted on the transmission; remove the electrical connector and the retaining bolt. Pull out the old sensor, then insert the new one, securing it with the bolt and reconnecting the electrical connector. Finally, reconnect the battery terminal and test the sensor to ensure proper function.
Which bolt pattern are you referring to?