0
What else can I help you with?
What is 1992 accord minimum brake rotor thickness front and back?
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
How do you repair 2000 Honda accord ex brake rotors?
AS A GENERAL RULE YOU GET THE ROTORS CUT OR RESURFACED BY A REPUTABLE SHOP. THERE IS NOT REPAIR THEY ARE EITHER THICK ENOUGH TO CUT OR THEY NEED TO BE REPLACED
How much to repair brakes Calipers pads and rotors and replace the brake fluid on a 2001 Honda accord?
The cost to repair the brakes on a 2001 Honda Accord, including replacing calipers, pads, rotors, and brake fluid, typically ranges from $400 to $800. Labor costs can vary significantly depending on the shop's hourly rate, while parts can range from $200 to $500 based on quality and brand. It's advisable to get multiple quotes from local mechanics for a more accurate estimate.
Where do you put transmission or brake fluid in 1993 Honda Accord?
where do I add brake fluid to my Honda accord 92
Who is the brake supplier for 2013 Honda accord?
who supplies the 2013 accord brakes to honda
How do you remove the front rotors from a 2003 Honda Accord?
Most Honda brake rotors require a large slide hammer as they are not only pressed onto the hub, but also rusted which makes it very hard to remove. This may well require an experienced technician.
Honda Accord and brake lamp?
the 1989 Honda accord lxi has a brake lamp light on the dashboard, if the brake lamp light is on, this means you have a brake/tail light out or disconnected
How to change the rotors on a 1991 Honda Civic?
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.
Remove front rotors 2004 Honda accord?
Remove the tire and wheel. Remove the brake pads and break hardware. The brake rotor will slide off. You may need to tap the rotor with a hammer.
2006 Honda Accord ex rear brake pads how to change?
How do you change rear brake pads on a 2006 honda accord ex?
Do you need a torque wrench when replacing pads and rotors?
You do not need a torque wrench when replacing brake pads and rotors. Some of the tools needed to change the rotors and pads are the c-clamp, sockets, wrench, grease, and brake cleaner.
What does it mean when you step on the breaks of a 91 Honda accord and the car starts to shake?
AnswerMy car had a problem like that also, I changed the front brake rotors and the problem went away. If replacing the brake pads and rotors does not solve the problem, you may have an issue with one or both of your calipers. Often calipers can sieze partially or completely. This will make the brake distribution uneven between the front wheels and can lead to shaking or pulsing when applying the brakes.
