0
What else can I help you with?
What size socket is needed to remove spark plug on a 2002 Hyundai Accent?
You will need a 5/8 socket.
What size socket is needed to remove spark plug on a 97 Hyundai accent?
You'll need a 5/8" socket.
Where are the spark plugs and how do you remove?
they are at the top of the cylinder head and just use a socket or wrench to remove it
What size socket do you need to remove the axle nut from a 2003 Hyundai sonata?
32mm Hex
What socket is needed to remove 91 cavalier wheel cylinder bolts looks like reversed torx?
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
How do you replace an alternator on a 2001 Hyundai Tiburon?
Lift the car, buy a socket set, and remove the oil filter..
What style of socket is used to remove cylinder head bolts on a 2003 Kia Rio?
It takes a 12 point 12 mm socket
How do you remove the timing chain on the R22 engine 4 cylinder on a Toyota truck?
with a wrench or socket
How do you replace a cigarette lighter socket on a 2005 Hyundai accent?
To replace the cigarette lighter socket on a 2005 Hyundai Accent, first, disconnect the negative battery terminal to ensure safety. Remove the dashboard trim surrounding the socket by gently prying it off, then unscrew and disconnect the old socket from its wiring harness. Install the new socket by connecting the wiring and securing it in place, then reattach the trim and reconnect the battery. Test the new socket to ensure it functions properly.
What size socket do i need to remove the head bolt from a 2005 Hyundai sonata?
To remove the head bolt from a 2005 Hyundai Sonata, you typically need a 10mm socket. However, it's essential to verify this with your specific engine type, as some models may have different bolt sizes. Always consult the vehicle's service manual for precise specifications before proceeding.
How do you remove the reservoir tank from the master cylinder on an 86 Mercury Sable?
To remove the reservoir tank from the master cylinder on an '86 Mercury Sable, start by disconnecting the brake fluid lines and removing any electrical connectors if applicable. Next, unbolt the reservoir from the master cylinder, which may require a socket or wrench. Carefully lift the reservoir off, ensuring not to spill brake fluid. Clean any residue from the master cylinder before installing a new reservoir if necessary.
Where is the drain plug on Hyundai Excel?
The drain plug on a Hyundai Excel is typically located at the bottom of the oil pan, which is situated beneath the engine. To access it, you'll need to raise the vehicle and may require a socket or wrench to remove the plug. Always ensure the engine is cool before attempting to drain the oil, and have a container ready to catch the old oil.
