0
The only tools you need is 2x 14mm and a 12mm and a bar of some sort to tension the new belt after install, first the 2x 14mm for losen (not remove) the bolt under the alternator, that is the bolt going true the anternator braket, use one to hold the bold and one to losen the nut, than lose the top one with the 12mm. slak the belt and remove, put the new in and tension it with a bar betwen the alt. and the engine and tighten the 12mm bold while holding tension, tight hard . then tighten the 14mm bolt/nut and U R done
What else can I help you with?
What tools needed to replace brake pad on a Toyota tercel?
To replace the brake pads on a Toyota Tercel a jack is needed. Some other tools that will be used are a socket wrench, screwdriver, lug wrench, and a pair of pliers.
What are the essential kitchen faucet replacement tools needed for the job?
The essential kitchen faucet replacement tools needed for the job are an adjustable wrench, pliers, screwdriver, plumber's tape, and a bucket or container to catch water.
Where is the fuel filter located ON a 1996 Toyota Tercel and what tools do you need to fix it?
On the firewall above the air intake hose and the purge canister. You can't miss it.
What Tools needed front brake replacement 2005 kia sorento?
09581-11000 to compress the piston
What tool is needed to change hydraulic struts on 1996 Toyota Tercel?
To change the hydraulic struts on a 1996 Toyota Tercel, you'll need a basic set of tools including a socket wrench set, a torque wrench, and possibly a pry bar for leverage. Additionally, having a pair of jack stands is essential for safely lifting and securing the vehicle while you work. A spring compressor may also be necessary if you're replacing struts that include coil springs. Always refer to the vehicle's manual for specific torque specifications and procedures.
What tools are needed to change front brake pads on a 2003 Toyota Highlander?
Changing your own front brake pads can save hundreds of dollars. Tools needed for the job are a jack, the brake pads, lug wrench, socket wrench, and brake fluid.
Is it a major job to change a 1993 Toyota Tercel power steering to manual steering?
Yes. You'll need to swap out the steering box and rack and pinion, which means disasembling the steering linkage. Unless you have the proper tools, you wont be able to get everything apart.
What special tools are needed to replace the front wheel bearings on a 2001 Toyota Sequoia 4wd Where can I purchase or rent the tools?
The most unusual tool need to replace the front wheel bearings on a 2001 Toyota Sequoia 4WD is a wheel puller. This tool is needed to remove the brake disc from the wheel. It can be rented at a tool rental business or bought at an automotive parts store.
What tools are needed in order to do a hard disk replacement?
From searching around, it looks like the tools you need to change a hard drive are a pair of scissors, and flat head screwdriver and a philips screwdriver. You may also need a pair of tweezers to help you get a hold of those tiny pieces that are needed.
How do you change the struts on a 95 tercel?
do not do this yourself if you dont have special tools it is too dangerous and aggravating i do everything myself but not this
What is the cost of equipment for bathroom vanity replacement?
here is a website with step-by-step information as to what to use and how to do it. the cost of the equipment needed totals to $632.45. this includes a new faucet, countertop and the tools needed to remove and replace the vanity.
What tools are needed for changing the rotors on a 2002 WS6?
No special tools are needed!
