98-01 ranger with a 4.0 liter v6
The recommended spark plug gap for a 1998 Mazda B4000 is .054"
it depends on the bolt patterns but don't c y not but if its a 4x4tranny it may not if the Mazda isn't a 4x4
On a 1998 B 4000, it is in the housing at the attachment of the upper heater hose.
The oil sending unit on a 1998 Mazda B4000 is located on the engine block, typically near the oil filter. It is usually positioned towards the back of the engine, on the driver's side. To access it, you may need to remove some components for better visibility and reach. Make sure to disconnect the electrical connector before removing the unit.
yes
Burn out the whole truck disconnect the battery do not ever drive the truck there are more but these will work. You are welcome
To locate the Powertrain Control Module (PCM) on a 1998 Mazda B4000, open the driver's side door and look beneath the dashboard. The PCM is typically mounted on the driver's side, near the firewall, and may be secured by screws or clips. You may need to remove a cover or panel for better access. Always ensure the vehicle is turned off and the battery is disconnected before handling the PCM.
The B2500 Series Mazda pick-up has a 2.5 L engine. FYI: B2000 = 2.0 L; B2500 = 2.5 L; B3000 = 3.0 L; B4000 = 4.0 L.
Checking on the location of the one for a 1998 4.0L: Under hood, center, upper engine area, mounted behind rear of intake manifold, in the engine block .
Rcommended manual transmission lubricant type: MERCON automatic transmission fluid - Haynes Repair Manual #36071, 1994-2005 Mazda Pick-ups B2300, B2500, B3000, B4000.
On a 1998 Mazda B4000, the door switch is typically located in the door frame or the door itself. When the door is closed, the switch is pressed in; when the door is opened, the switch pops out, activating the interior lights or triggering the door ajar warning. You can usually find it near the latch mechanism on the driver's and passenger's side doors. If you're having trouble locating it, consulting the vehicle's service manual can provide specific guidance.
Speed sensor located on top of rear axel dead center on my 99 B2500. Kills both the cruise and the speedomoter. Easy fix. I want to add to all 1994 and modern Mazda B series mini trucks that all this trucks are really Ford, all this info can be found in all the ford ranger books as well here in this forums, I am a proud owner of numerous Mazda Trucks, I still own my first Mazda B2200 1991 SE-5, and my second Mazda B2300 1998 and the third one I still own a B4000 1999 non of them 4x4. from 1994 and UP the speedometer is electrical and the sensor is at the rear differential and some automatic on the tranny. Hope this helps all of you on finding this sensor, let me add this sensor is very important so the computer can control the fuel economy of the ride.........................................